Date: Wed, 20 Sep 2000 16:37:49 -0400
The carb to intake manifold has caused air leak problems for many. The
connection only fits properly ONE WAY. Notice in the illustration that
there is an indentation on the intake manifold that a ridge on the carb
must fit into. Also notice the clamp's position. Do not rotate the
clamp, leave the screw on top...don't twist it to the side.
When the carb is properly seated, it will not twist in the manifold. It
kinda snaps in place when seated.
--
wiliedog ~V~005
Blk/Rd D1
Coushatta, LA
