Date: Mon, 22 Feb 1999 19:55:55 -0500
This is the Dyno Run produced by Rolling Thunder's Dynojet 150
dynomometer.
My bike:
'96 1500 Classic
42,000 miles
Rebuilt at 31,000 due to oil pump failure -- included bore job .010'
over, pistons/rings to match.
Thunder Kit, open K&N filter
Coasters
170 main jet, Dynojet needle, e-clip in the 4th notch, two washers on
top, mixture screw 2.5 turns out, slide drilled.
V&H Straightshots with NO baffles
160-80 rear tire (some think this makes a difference, I don't)
Joker
